Model 11: Sandy

420+
5

Price:$30.00

It’s a girl – Sandy! This is our easiest-to-build and most durable 1/8 scale RC model. If you still hesitate to start building 3D Sets of large-scale models, this is the one for you.

The model measures approximately 44 cm in length at a 1:8 scale and is ready to be outfitted with your own RC equipment. It is suitable for use both indoors and outdoors.

This set includes 3D printable parts for your 3D printer, however, non-printable components such as screws and electronics must be purchased separately. Links to purchase these parts are included in the Build Guide.

Read More
  • Printing time
    10,5 days
  • Bed size
    18x18x18 cm
  • Parts
    113 pcs
  • Weight
    1,9 kg
  • Material
    PLA
  • Material
    PC Blend
  • Soldering
    yes
  • Glueing
    no glue

Model 11: Sandy Accessories

3D Sets Entry Product

If you are new in our models, this one is good to start with!

3D Sets BeltDrive

Durable, simple, and quiet - thanks to timing belts. Allows both brushed and brushless motors.

Prusa Mini compatible

All parts fits 18 x 18 x 18 cm build volume.

Easy-to-disassemble

All parts are connected by screws. No glue required!

Fun to drive

...thanks to rear wheel drive. Lets's make some donuts!

Building The Sandy! by 3DSets.

  • Building The Sandy! by 3DSets.

  • Model 11: Sandy - fun to drive!

  • Model 11: Sandy pictures and driving video

Model 11: Sandy
variability & what is under the hood

Easy to Assemble

To build the model you only need some basic tools such as a screwdriver, a sharp knife, soldering iron and most importantly – a good mood.

Cheap and fast repairs

Did you break something? Don’t worry, you’ll have a reprinted spare part in no time. Then loosen a few screws and replace the damaged parts. And – drive again immediately!

3d print maximum, buy minimum

“Don’t buy parts – just print them, nearly all!” You print most parts starting with bodywork, complete chassis and even cardan joints and gearbox. Buy just motor, radio control electronics, tires and shocks/springs – and you are ready for ride.

Step-by-step User Guide

Comprehensive Build Guide is available for free to anyone – lets go through before you buy the model. Build Guide include a complete bill of materials and links for online stores, when you can purchase non-printable parts.

“Build when you print” – you get not only the ready-made print plates but also the time-effective print sequence, so you can continue assembling while you printing and do not need to wait for the part you need.

Build Guide available here
List of non-printable parts is here

 

  • 3D Sets BeltDrive – the transmission solution is durable, simple, and quiet because it uses timing belts.
  • Differential – 3D Sets developed unique design of opened differential for best on-road capabilities. The differential is integrated right into the BeltDrive pulley and its special design doesn’t require any metal shafts or other tiny parts – everything is done using standard bearings, used in every 3D Sets model.
  • HD Surface Details – this technique is used for incredibly fine surface structures of the seats.
  • Easy maintenance – the front and rear axles are attached with just a few screws and can be very easily removed from the model. An integral part of the rear axle is the transmission with engine and ESC – the entire drive system can be removed from the body in one movement.
  • Easy-to-disassemble – Metal nuts are now embedded for repeatedly disassembled or stressed joints. Removing the axles is now much more convenient.
  • Double Wishbone suspension – independently suspended front axle wheels with sophisticated wheel geometry. The axle is designed to work with 50-65 mm long shocks with short travel. The axle uses a system of fully printed 3D Sets ball joints and is optimized for higher impact resistance.
  • Highly detailed model of the engine – the engine covers the moving parts of the gearbox and it is possible to experiment with color by changing the filament during printing.
  • Innovative battery box with easy opening with rotary locks, easily accessible from the bottom of the model.
  • Many new details – e.g. realistic emboss on the inner parts of bodywork, interior trims, fuel tank in the trunk, and more.
What you get:
  • 3d printing files: .stl and .gcode optimised for Prusa Mk2-3 and Prusa Mini printers, .stl for regular 3d printer with 20×20 cm bed size. The total download size is over 365 MB. Total printing time is about 10,5 days of continuous printing.
  • step-by-step build guide, available here
  • list of all non-printable items (like motor, tires, screws, etc.) with link to recommended online stores
What you will need:
  • any 18 x 18 cm (or bigger) 3D printer, Prusa i3 recommended
  • 1.9 kg of PLA filament is needed for all parts, PC Blend for some specific parts.
  • bring your own motor/speed controller, servo, and battery
  • screws and nuts
  • set of bearings
  • set of rubber tires and shocks
How I get the purchased files?
  • after purchasing this digital product, you can download the printing files under “My Account” (in the “Downloads” section)

Technical Specification

Dimensions44.0 cm length, 24.5 cm width (including mirrors), 18.5 cm height
Filament weight1.9 kg
Model weight2 kg
File size365 MB

2 reviews for Model 11: Sandy

Only logged in customers who have purchased this product may leave a review.

2 reviews for Model 11: Sandy

  1. Matthew Bingenheimer (verified owner)

    Absolutely Fantastic! Beautifully modeled files and Awesome documentation too!

  2. delboy2104 (verified owner)

    I was not expecting this model to turn out so well. It fitted together very well and looks fantastic. I now have the hard task of deciding which model to make next . You have a very happy customer !